|
SUPERNOVA19.com SUPERNOVA24.com
GARAGE SALE
Serious inquiries only. All will be considered.
I've bought so many parts over the years they're piling up.
There is no reason that I need three intakes for the same motor. Or look for something for a year, spend more then you should for it and then use it for 5 minutes checking something and then put it on a shelf never to be touched again. The peace of mind was worth it but why keep it?
Now you see why it's time to unload and make some space. You can also help with the Race boat's restoration by helping to make some space and me a couple bucks so I can buy more parts. If you need it you're not going to find it cheaper so hit us with an email.
Most everything will come with the weight in the description so you can figure shipping.
So let's get to the shopping.
Boat Parts 
____________________________________________________________________
Other
Misc Boat Stuff
3 1/4 Inch Gauge Holder
For the dash of your boat or the hood of your car. If you need a place to mount a 4” gauge this is it. A quick sanding and paint job to match what ever you mount it to and you will be all set.
Blue Vector Speedometer
Blue Vector Series - The Vector Series has crisp blue and white graphics on a deep charcoal background, with black bezel speedometer has a 3 5/16" diameter dials and require a 3 13/32" cutout. Ready to go.
14" Steering Wheel
Stainless Steel Destroyer Steering Wheel Made of non-magnetic type 304 stainless steel 13-1/2" diameter, 5 spokes with wood center cap, Wheel has 22º of dish, Fits standard 3/4" tapered shaft helm.
30+ years old and looks as good as new.
Rod Holder
Make a deal on something and you can have it.
Bilge Pumps
I think they are 500gph but not sure. They are for a small boat or service stuff.
Throttle Controllers
They are not perfect but they do work perfect.
Perko 4" Straight Chock - Chrome Plated Zinc
Set of 2 new in box.
Line Chocks
Another set of 2 slightly used.
____________________________________________________________________
Misc Stuff
Grote 62521 Back Up lights
Have 6. Take them all.
3 Cable Pulls
Good for throttles or a choke.
____________________________________________________________________
MOTORS
(Same as eBay Motors)
Volvo Stuff
Volvo Drive Shield Parts
Water pick up tube, Steering bar and universal linkage. All good to go.
Volvo Penta Yoke
The old style Volvo Penta drive shaft yoke. Not a thing wrong with it. Had to go to a fine spline to match a bellhousing so it is just left over.
Volvo 280 Transom Shield
A little cleaning and paint and it's ready to go in.
PERTRONIX 1381A
1962-1972 MOPARV8 with standard single point ignition.
Moeller Marine Fuel Gauge Sender
(50-Gallon, 45" x 12.5" x 22")
Perko Gas Caps
Valve Cover Oil Caps
Fuel Pressure Regulator
Some left over things.
Nicon 1 1/4" Whip Strut
3" Exhaust Tips
Took them out of my 19 to replace with 4". Could use a chrome job but are fine besides that.
4" to 3" Exhaust Reducers
Or they can be 3" to 4" expanders. Just how you look at it. Been sitting on a shelf for a project that has gone by.
Trim Master Trim Tab Pump
Bought it for the race boat and it and I couldn't use it. Should be fine and ready to go.
____________________________________________________________________
MerCruiser Stuff
Two Velvet Drives
Twin C72 Velvet drives off of a set of 454's. They are 1.52 to 1 and will not work for the race boat.
My loss is your gain. Make an offer.
Fuel Filter Mount
Off a BBC but will fit many different motors. All in good working shape.
Fits filter Baldwin BF791
MerCruiser Trim Pump Bracket
Mine mounted a different way so I have no use for it.
____________________________________________________________________
Big Block Chevy Marine Stuff
Mercuriser 496 Risers
Not your standard riser by a long shot.
Some paint rash but beside that they are perfect. Bought them by mistake for my 454 exhaust and they don't fit so they have to go. Will consider trade for risers I need.
JEGS Mechanical Fuel Pump
New in box. Features a chrome finish and an adjustable 360 degree housing to accommodate any and all fuel line routing configurations.
BBC Head Stud Girdles
Stud girdles will strengthen the weak link in the valve train. While under a tremendous amount of load, the flexing of the studs may cause loss of horsepower or engine failure. Stud girdles require less adjustment of valve lash and provide enhanced rigidity and strength. Requires the use of tall valve covers.
Bought these for the 454 last winter and didn't install them for some reason. Until I do they are ready to go and up for sale.
9lbs with box.
BBC HASTINGS CHROME MOLY PISTON RING SETS
Refreshed BB Chevy Heads
Big Block Chevy Heads, "peanut" round ports 14092360, removed from a 1986 Mercruiser MIE340, complete and in good shape.
These came on a motor I bought that I am only using the block. They were rebuilt, test fired the motor and then sat for the last couple years.
MerCruiser Dipstick Tube Assembly
454/502 BBC GM 8qt oil pan tube and aftermarket dipstick.
I bought this because my MIE 340 motor didn't come with the original and was not sure I had the proper oil level with the aftermarket stick I used.
Spent about a year looking for one. Bought it, checked against what I had (it was right). Kept the original stick in my motor (I like original) and put the after market in the extra tube and put it on a shelf.
It's time for it to find a new home.
Mercruiser BBC Valve Covers
I have 2 sets of these for a BBC. That’s 2 sets more then I need so they have to go.
Two Rochester 4M (Quadrajet)
marine application carburetor
MCM/MIE 228, 230, 260, 330, 340 w/305", 350", 454"
This is professionally remanufactured to original specifications-good as new for less money!
Thunderbolt IV & V and Ignition Module For GM V-8
Not sure of the condition. I have never run this distributor. It came with a motor I am building for a boat and new ignition system is in the works for it. So I have no use for this one. The cap is broken (I did that moving the motor) but beside that it all looks good to go.
Stock Gen V 454 Oil Pan
This is another "take off" of a motor I am building for a boat. I have a 8qt pan for the motor so again I have no use for this except to take up space in the garage.
It's a little dirty but there is nothing wrong with it.
Off of a MIE340 Mercruiser. Good as the day it was made.
454 Throttle Linkage Bracket
MerCruiser 7.4 Cowl
These are in excellent shape. I have two of them that would not work in a 1969 raceboat but they may work good in yours. They sure do look good.
Big Block Chevy
Fuel Pump Block Off Plate
____________________________________________________________________
Props
These are all for Volvo Penta outdrives.
(Remember that all Volvo Pentas are reversible)
Each prop weighs 6 to 10 lbs each w/o box.
Aluminum 14X23 Left (short shaft)
When I bought this prop it was on a Donzi. It has some normal use on it but is in good shape overall.
Aluminum 16X23 Left (short shaft)
This prop is near perfect except for some paint.
I also don't think you will find another like it. It's the only Volvo prop I have found in this size that's for sure.
Aluminum 14X23 Right (short shaft)
This prop has seen better days but it is sound and would make a good back-up prop
Aluminum 14X16 Left (short shaft)
Another prop that I'm not sure how it became mine.
It is in pretty good shape but does have some minor use on it.
14X23 Ellison racing props. (2) right's and (1) Left (short shaft)
*********Update*******
There is only one right hand prop left.
These are a rare find and to have 4 of them is just unheard of.
What we have here is 3 Ellison offshore props. These props would retail for over $700 each and that was many years ago. They have never been touched or reworked in any way. Run them like they are or do what I did below for $100 and have the nicest prop you could ever have on a Volvo. Sadly they all have to go due to not having enough pitch for what I built.
16X26 Left, Ellison racing prop (short shaft)
Almost perfect.
Besides a polishing to make it shinny this prop s ready to go.
15X19 Cupped, Right, Johnson prop (short shaft)
Another great Bronze, Volvo prop.
This prop is in great shape with only some light use. Bolt up and it's ready to go.
14lb w/o box.
____________________________________________________________________
Serious inquiries only with serious offers. All will be considered.
The SuperNova19 Network
|